Use : For interior solid timber, parquet, cork, veneer, customwood and concrete

surfaces. Easy to apply 2 coat system, no primer required and

no sanding between coats. Very low odour during application

and drying period, odourless when cured. Contains no biocides

nor preservatives and is safe for man, animal and plant when

dry. Safe for children’s toys.

Polyx Oil is available in 2 types - Normal or Rapid. The Rapid Polyx Oil should not be used

except in cold conditions when curing time may be an issue. Generally, the Rapid Polyx Oil

will cure faster, with 2 coats often able to be applied on the same day.

The finish for both products is identical.

Preparation : The surface must be dry, clean and free of grease (moisture

content max 20%). Special care should be taken to remove any

dust from the pores of the timber. Fill all small holes or surface

dents with wood filler. Clean or lightly sand any

existing oil finish. Completely remove any existing varnish

coating.

New Surfaces : Sand the surface to a fine finish, 120-150 grade paper is

recommended. Carefully remove any dust.

Renovated Surfaces : Old, well preserved coatings should be given a light sand. Apply

1 to 2 coats of Osmo Hardwax Oil. Old damaged and

weathered coatings should be completely removed and then

treated as a new surface.

Application : Apply sparingly and evenly along the wood grain with a good

quality bristle floor or hand brush. As this product has an

extremely high solid content (like apple sauce), the finish must

be applied sparingly and worked to a thin even coating. Remove

any excess of finish immediately. Leave to dry overnight (12

hours). Coverage approx 24-30 sqm/L. The temperature should

be between 8 and 20 degC. Allow good ventilation. Apply the

second coat as for the first. Leave to dry 24 hours with good

ventilation provided. Treat the floor with care as it continues to

harden for 14 days. Do not wet mop for the first two weeks while

the floor cures to a waterproof finish.

Safety Instructions : Keep out of reach of children. Do not pour oil residue into the

sewer. Let the remnants dry out and dispose of with your

domestic rubbish collection, flammable products'. Do not

crumple soaked rags (otherwise spontaneous combustion may

occur)

Composition : Sunflower oil, Thistle oil, Soyabean oil, Candelilla wax,

Carnauba wax, disaromatized benzolefree solvent.